35kV busbar Heat shrink tube
Product Details:
| electricity | electricity busbar protection |
|---|---|
| Place of Origin | Liaoning, China (Mainland) |
| Brand Name | UPM |
| Model Number | S1-35 |
Detailed Product Description
35kV busbar Heat shrink tube
S1-35 Halogen free flame retardant bus bar insulation heat shrinkable tubing
Voltage class 36kV ideal for high voltage bus bar insulation
Heavy wall heat shrinkable tubing for protection and insulation of bus bar against accidents caused by electrified bare bus bar
Applications
Bus bar insulation and protection
In switchgears cabinets where space is limited and air spacing between bus bars need to be kept at minimal
Features/Benefits
Reduce bus bar clearance requirement
Give designer more freedom in designing switchgear cabinets when space is premium
Protects against accidental flashover up to 36kV
Protects against short circuit and electrical leakage caused small animals
Protects against corrosion dirt and other contaminants that may cause accidental flashover
Halogen Free
Flame resistant with oxygen index higher than 27
Available in continuous length roll form for convenient and economical installation
Temperature Rang
Operating Temperature: -40~105
Shrink Temperature: 125
Colour:red
Product Code Cross References
Sumitomo: IRRAX sleeve SBI 350
Clearance Reduction Guide
| Bus bar Type | Applicable Product | Min. Clearance Required(mm) | |||
| Electrode toelectrode | Electrode toground | Electrode toelectrode | Electrode toground | ||
| Round sectionalUp to 36 kV | S1-35 | 160 | 220 | 200 | 270 |
| Rectangle sectionalUp to 36 kV | S1-35 | 180 | 260 | 220 | 285 |
* The table above indicates the possible clearance reductions made by using S1 tubing. These clearances should not be adopted without testing. Sharp electrodes and usual geometries may require more clearance.
Technical Details:
Test item | Test standard | Typical Data |
Density | ASTM D2671 | 1.3~1.35 |
Heat shock 4hrs at 200 | ASTM D2671 | No drop no flow |
Tensile strength <4.0mm/0.18inch wall >4.0mm/0.18inch wall | ASTM D2671 | >11Mpa >10Mpa |
Ultimate Elongation | ASTM D2671 | >400% |
Accelerated Ageing 168hrs at 136 Tensile strength Ultimate Elongation | ASTM D2671 | >10Mpa >300% |
Low temperature flexibility 4hrs at -40 | ASTM D2671 | No cracking |
Flammability | ASTM D2863 | OI>30 |
Volume resistivity | ASTM D2671 | >1014Ω.cm |
Dielectric strength 2mm/0.08inch wall 2.5 mm/0.10inch wall 3 mm/0.12inch wall | ASTM D2671 | >20kV/mm >17kV/mm >15kV/mm |
Water absorption 336hrs at 23 | ASTM D570 | <0.5% |
Resistance to selected fluids 168hrs at 23 Tensile strength Ultimate Elongation | IEC 60684-2 | >8Mpa >250% |
Copper corrosion 158 for 168hrs | IEC 60684-3 | Pass |
Long term ageing 3000hrs at 120 Elongation at break | IEC 60684-2 | >175% |
Thermal endurance | IEC 216 | 105 |
Color fastness to light | IEC 60684-3 | Contrast between exposed and unexposed parts The color no change |
Smoke index | / | Less than 120 |
Product Selection
S1(n)-35 | a + b min. ~ max. (mm) | d min. ~ max. (mm) | min. thickness for 36kV shrink on the bus bar (mm) | Standard Packing (m/roll) | Standard Packing (roll/box) | ||
| Φ25/10 | 15 | 25 | 10 | 18 | 2.5 | 15 | |
| Φ30/12 | 22 | 35 | 15 | 25 | 2.5 | 15 | |
| Φ40/16 | 28 | 45 | 20 | 30 | 2.5 | 15 | |
| Φ50/20 | 38 | 55 | 25 | 40 | 2.5 | 15 | |
| Φ65/25(Φ75/30) | 45 | 65 | 35 | 50 | 2.5 | 15 | |
| Φ85/35(80/32) | 55 | 90 | 40 | 60 | 2.5 | 15 | |
| Φ100/40 | 70 | 110 | 50 | 80 | 2.5 | 15 | |
| Φ120/50 | 90 | 140 | 60 | 95 | 2.5 | 15 | |
| Φ150/60 | 105 | 180 | 70 | 120 | 2.5 | 15 | |
| Φ175/75 | 130 | 210 | 85 | 140 | 2.5 | 15 | |
| Φ210/85 | 140 | 260 | 95 | 170 | 2.5 | 15 | |
35kV busbar Heat shrink tube
Send your message to this supplier
Other Products from this Supplier
See more
35kV busbar Heat shrink tube, Heat Shrinkable tubing, Busbar tubing products from this supplier.
Didn't find what you're looking for? Post a buying lead.
Product Showcase[30]
Products
- protective heat shrink tube [1]
- Halogen free flame retardant busbar HS tube [1]
- DSG canusa CFTV heat shrink tube [1]
- CATV polyolefin heat shrinkable tubing [1]
- Automotive wire joints heat shrink tube [1]
- Anti tracking heat shrink tube [1]
- A4 Protective Heat Shrinkable Tubing for Automotiv [1]
- CATV cable jackets [3]
- red and clear glue heat shrink breakout boot [1]
- Spriral glue heat shrink breakout boot [1]
- CATV ,polyolefin heat shrinkable tubing [2]
- CST EPDM Cold Shrink Tubing [1]
- T1 Insulative heat shrink tape [1]
- C102 Stress Control heat shrink tube [1]
- C 8.7/15 Heat Shrinkable Cable Accessories [1]
- 1kV Busbar Insulation Heat Shrink Tube [1]
- S2(n) Halogen free flame retardant thin wall H.S.T [1]
- S3nMedium wall halogen-free heat shrink tubing [1]
- CATV ,Feeder cable dual wall heat shrink tube [1]
- S3(nh)Halogen Fee Heavy Wall Heat Shrink Tube [1]
- protective heat shrink tube [1]
- Halogen free flame retardant busbar HS tube [1]
- DSG canusa CFTV heat shrink tube [1]
- CATV polyolefin heat shrinkable tubing [1]
- Automotive wire joints heat shrink tube [1]
- Anti tracking heat shrink tube [1]
- A4 Protective Heat Shrinkable Tubing for Automotiv [1]
- CATV cable jackets [3]
- red and clear glue heat shrink breakout boot [1]
- Spriral glue heat shrink breakout boot [1]
- CATV ,polyolefin heat shrinkable tubing [2]
- CST EPDM Cold Shrink Tubing [1]
- T1 Insulative heat shrink tape [1]
- C102 Stress Control heat shrink tube [1]
- C 8.7/15 Heat Shrinkable Cable Accessories [1]
- 1kV Busbar Insulation Heat Shrink Tube [1]
- S2(n) Halogen free flame retardant thin wall H.S.T [1]
- S3nMedium wall halogen-free heat shrink tubing [1]
- CATV ,Feeder cable dual wall heat shrink tube [1]
- S3(nh)Halogen Fee Heavy Wall Heat Shrink Tube [1]
- S3Flame Retardant Dual Wall Heat Shrink Tube [8]
- Flame Retardant Thin Wall Heat Shrink Tube [1]
- 6-24kV Bus Bar Heat Shrink Tubing [5]
- A1 Wire Splices Heat Shrinkable Tubing [1]
- S2(s) Ultra thin wall marking heat shrink tube [1]
- S2 Flexible Highly Flame Retardant Heat Shrinkable [1]
- thin wall different color heat shrink tube [1]
- PVDF heat shrink tube [1]
- Automotive brake/fuel line protection HST [1]
- Heavy Wall heat shrink tube [1]
- HDPE Anti-corrosion Mastic heat shrink tube [3]
- identification/marking heat shrink tube [1]
- PTFE heat shrink tube [2]
- Green Yellow heat shrink tube [1]
- feeder cable heat shrink tube [2]
- abrasive heat shrink tube [6]
- Rubber and silicon heat shrink tube [1]
- Busbar Boot (shrounds) [2]
- fiber optic splice [1]
- thin wall heat shrink tube [1]
- Anti Tracking Heat Shrink Tubing [1]
- Dual wall with adhesive heat shrink tubing [9]
- Bus Bar Heat Shrink Tubing [2]
- Cable Accessories [5]
- Nlyon/HDPE Water Proof Butt Splice HST [2]
- Solder Sleave Wire Terminators [4]
- Automotive Wire Splice HST [2]
- Automobile Brake /fuel line Protection HST [2]
- Automobile Air-Conditioner Pipe Protection HST [1]
- Others [8]
Company Info
Union Polymer Material Co., Ltd.
[China (Mainland)]
[Verified Member]
City: Dalian
Province/State: Liaoning
Country/Region : China (Mainland)
Business Type:Manufacturer, Trading Company
Online Postings: Products